CentOS 7 Не удалось запустить службу httpd

Question

Служба Apache/httpd не запускалась в моем CentOS 7, и я использую командную строку.

Так что, когда я печатаю apachectl restart,

я получаю следующее сообщение об ошибке:

Job for httpd.service failed because the control process exited with error code. See "systemctl status httpd.service" and "journalctl -xe" for details.

httpd.conf:

# This is the main Apache HTTP server configuration file. It contains the 
# configuration directives that give the server its instructions. 
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. 
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> 
# for a discussion of each configuration directive. 
# 
# Do NOT simply read the instructions in here without understanding 
# what they do. They're here only as hints or reminders. If you are unsure 
# consult the online docs. You have been warned. 
# 
# Configuration and logfile names: If the filenames you specify for many 
# of the server's control files begin with "/" (or "drive:/" for Win32), the 
# server will use that explicit path. If the filenames do *not* begin 
# with "/", the value of ServerRoot is prepended -- so 'log/access_log' 
# with ServerRoot set to '/www' will be interpreted by the 
# server as '/www/log/access_log', where as '/log/access_log' will be 
# interpreted as '/log/access_log'. 

# 
# ServerRoot: The top of the directory tree under which the server's 
# configuration, error, and log files are kept. 
# 
# Do not add a slash at the end of the directory path. If you point 
# ServerRoot at a non-local disk, be sure to specify a local disk on the 
# Mutex directive, if file-based mutexes are used. If you wish to share the 
# same ServerRoot for multiple httpd daemons, you will need to change at 
# least PidFile. 
# 
ServerRoot "/etc/httpd" 

# 
# Listen: Allows you to bind Apache to specific IP addresses and/or 
# ports, instead of the default. See also the <VirtualHost> 
# directive. 
# 
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses. 
# 
#Listen 12.34.56.78:80 
Listen 80 

# 
# Dynamic Shared Object (DSO) Support 
# 
# To be able to use the functionality of a module which was built as a DSO you 
# have to place corresponding `LoadModule' lines at this location so the 
# directives contained in it are actually available _before_ they are used. 
# Statically compiled modules (those listed by `httpd -l') do not need 
# to be loaded here. 
# 
# Example: 
# LoadModule foo_module modules/mod_foo.so 
# 
Include conf.modules.d/*.conf 

# 
# If you wish httpd to run as a different user or group, you must run 
# httpd as root initially and it will switch. 
# 
# User/Group: The name (or #number) of the user/group to run httpd as. 
# It is usually good practice to create a dedicated user and group for 
# running httpd, as with most system services. 
# 
User apache 
Group apache 

# 'Main' server configuration 
# 
# The directives in this section set up the values used by the 'main' 
# server, which responds to any requests that aren't handled by a 
# <VirtualHost> definition. These values also provide defaults for 
# any <VirtualHost> containers you may define later in the file. 
# 
# All of these directives may appear inside <VirtualHost> containers, 
# in which case these default settings will be overridden for the 
# virtual host being defined. 
# 

NameVirtualHost *:80 


<VirtualHost *:80> 
    ServerAdmin admin@testbetadmin.com 
    DocumentRoot /var/www/testbetadmin.com/ 
    ServerName testbetadmin.local 
    ServerAlias testbetadmin.local 
    ErrorLog /var/www/testbetadmin.com/error.log 
    CustomLog /var/www/testbetadmin.com/requests.log 
</VirtualHost> 

# 
# ServerAdmin: Your address, where problems with the server should be 
# e-mailed. This address appears on some server-generated pages, such 
# as error documents. e.g. admin@your-domain.com 
# 
ServerAdmin root@localhost 

# 
# ServerName gives the name and port that the server uses to identify itself. 
# This can often be determined automatically, but we recommend you specify 
# it explicitly to prevent problems during startup. 
# 
# If your host doesn't have a registered DNS name, enter its IP address here. 
# 
ServerName www.testbetadmin.com:80 

# 
# Deny access to the entirety of your server's filesystem. You must 
# explicitly permit access to web content directories in other 
# <Directory> blocks below. 
# 
<Directory /> 
    AllowOverride none 
    Require all denied 
</Directory> 

# 
# Note that from this point forward you must specifically allow 
# particular features to be enabled - so if something's not working as 
# you might expect, make sure that you have specifically enabled it 
# below. 
# 

# 
# DocumentRoot: The directory out of which you will serve your 
# documents. By default, all requests are taken from this directory, but 
# symbolic links and aliases may be used to point to other locations. 
# 
DocumentRoot "/var/www/html" 

# 
# Relax access to content within /var/www. 
# 
<Directory "/var/www"> 
    AllowOverride None 
    # Allow open access: 
    Require all granted 
</Directory> 

# Further relax access to the default document root: 
<Directory "/var/www/html"> 
    # 
    # Possible values for the Options directive are "None", "All", 
    # or any combination of: 
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews 
    # 
    # Note that "MultiViews" must be named *explicitly* --- "Options All" 
    # doesn't give it to you. 
    # 
    # The Options directive is both complicated and important. Please see 
    # http://httpd.apache.org/docs/2.4/mod/core.html#options 
    # for more information. 
    # 
    Options Indexes FollowSymLinks 

    # 
    # AllowOverride controls what directives may be placed in .htaccess files. 
    # It can be "All", "None", or any combination of the keywords: 
    # Options FileInfo AuthConfig Limit 
    # 
    AllowOverride None 

    # 
    # Controls who can get stuff from this server. 
    # 
    Require all granted 
</Directory> 

# 
# DirectoryIndex: sets the file that Apache will serve if a directory 
# is requested. 
# 
<IfModule dir_module> 
    DirectoryIndex index.html 
</IfModule> 

# 
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
# 
<Files ".ht*"> 
    Require all denied 
</Files> 

# 
# ErrorLog: The location of the error log file. 
# If you do not specify an ErrorLog directive within a <VirtualHost> 
# container, error messages relating to that virtual host will be 
# logged here. If you *do* define an error logfile for a <VirtualHost> 
# container, that host's errors will be logged there and not here. 
# 
ErrorLog "logs/error_log" 

# 
# LogLevel: Control the number of messages logged to the error_log. 
# Possible values include: debug, info, notice, warn, error, crit, 
# alert, emerg. 
# 
LogLevel warn 

<IfModule log_config_module> 
    # 
    # The following directives define some format nicknames for use with 
    # a CustomLog directive (see below). 
    # 
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined 
    LogFormat "%h %l %u %t \"%r\" %>s %b" common 

    <IfModule logio_module> 
     # You need to enable mod_logio.c to use %I and %O 
     LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio 
    </IfModule> 

    # 
    # The location and format of the access logfile (Common Logfile Format). 
    # If you do not define any access logfiles within a <VirtualHost> 
    # container, they will be logged here. Contrariwise, if you *do* 
    # define per-<VirtualHost> access logfiles, transactions will be 
    # logged therein and *not* in this file. 
    # 
    #CustomLog "logs/access_log" common 

    # 
    # If you prefer a logfile with access, agent, and referer information 
    # (Combined Logfile Format) you can use the following directive. 
    # 
    CustomLog "logs/access_log" combined 
</IfModule> 

<IfModule alias_module> 
    # 
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location. 
    # Example: 
    # Redirect permanent /foo http://www.example.com/bar 

    # 
    # Alias: Maps web paths into filesystem paths and is used to 
    # access content that does not live under the DocumentRoot. 
    # Example: 
    # Alias /webpath /full/filesystem/path 
    # 
    # If you include a trailing/on /webpath then the server will 
    # require it to be present in the URL. You will also likely 
    # need to provide a <Directory> section to allow access to 
    # the filesystem path. 

    # 
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that 
    # documents in the target directory are treated as applications and 
    # run by the server when requested rather than as documents sent to the 
    # client. The same rules about trailing "/" apply to ScriptAlias 
    # directives as to Alias. 
    # 
    ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" 

</IfModule> 

# 
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased 
# CGI directory exists, if you have that configured. 
# 
<Directory "/var/www/cgi-bin"> 
    AllowOverride None 
    Options None 
    Require all granted 
</Directory> 

<IfModule mime_module> 
    # 
    # TypesConfig points to the file containing the list of mappings from 
    # filename extension to MIME-type. 
    # 
    TypesConfig /etc/mime.types 

    # 
    # AddType allows you to add to or override the MIME configuration 
    # file specified in TypesConfig for specific file types. 
    # 
    #AddType application/x-gzip .tgz 
    # 
    # AddEncoding allows you to have certain browsers uncompress 
    # information on the fly. Note: Not all browsers support this. 
    # 
    #AddEncoding x-compress .Z 
    #AddEncoding x-gzip .gz .tgz 
    # 
    # If the AddEncoding directives above are commented-out, then you 
    # probably should define those extensions to indicate media types: 
    # 
    AddType application/x-compress .Z 
    AddType application/x-gzip .gz .tgz 

    # 
    # AddHandler allows you to map certain file extensions to "handlers": 
    # actions unrelated to filetype. These can be either built into the server 
    # or added with the Action directive (see below) 
    # 
    # To use CGI scripts outside of ScriptAliased directories: 
    # (You will also need to add "ExecCGI" to the "Options" directive.) 
    # 
    #AddHandler cgi-script .cgi 

    # For type maps (negotiated resources): 
    #AddHandler type-map var 

    # 
    # Filters allow you to process content before it is sent to the client. 
    # 
    # To parse .shtml files for server-side includes (SSI): 
    # (You will also need to add "Includes" to the "Options" directive.) 
    # 
    AddType text/html .shtml 
    AddOutputFilter INCLUDES .shtml 
</IfModule> 

# 
# Specify a default charset for all content served; this enables 
# interpretation of all content as UTF-8 by default. To use the 
# default browser choice (ISO-8859-1), or to allow the META tags 
# in HTML content to override this choice, comment out this 
# directive: 
# 
AddDefaultCharset UTF-8 

<IfModule mime_magic_module> 
    # 
    # The mod_mime_magic module allows the server to use various hints from the 
    # contents of the file itself to determine its type. The MIMEMagicFile 
    # directive tells the module where the hint definitions are located. 
    # 
    MIMEMagicFile conf/magic 
</IfModule> 

# 
# Customizable error responses come in three flavors: 
# 1) plain text 2) local redirects 3) external redirects 
# 
# Some examples: 
#ErrorDocument 500 "The server made a boo boo." 
#ErrorDocument 404 /missing.html 
#ErrorDocument 404 "/cgi-bin/missing_handler.pl" 
#ErrorDocument 402 http://www.example.com/subscription_info.html 
# 

# 
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall may be used to deliver 
# files. This usually improves server performance, but must 
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise 
# broken on your system. 
# Defaults if commented: EnableMMAP On, EnableSendfile Off 
# 
#EnableMMAP off 
EnableSendfile on 

# Supplemental configuration 
# 
# Load config files in the "/etc/httpd/conf.d" directory, if any. 
IncludeOptional conf.d/*.conf 

systemctl status httpd.service

journalctl -xe

Answer 1

Журнал указывает, что у вас есть синтаксическая ошибка. Перейдите в документацию Apache о том, как правильно использовать CustomLog directive.

Кроме того, не используйте apachectl для перезагрузки httpd. CentOS 7 использует systemd, поэтому вместо этого запустите syatemctl restart httpd.