Доступ PHPMyAdmin заварить

Question

Простой вопрос, но я с трудом решая его

Я установил phpmyadmin через варку, с brew install phpmyadmin.

Теперь мои php, apache и mysql работают нормально (It Works и mysql cli), как мне получить доступ к интерфейсу phpmyadmin?

Я попытался http://127.0.0.1/phpmyadmin, но получить 404.

Я не могу найти способ, чтобы заставить его работать!

Вот выход brew install phpmyadmin

installing dependencies for phpmyadmin: php55, mcrypt, php55-mcrypt 
==> Installing phpmyadmin dependency: php55 
==> Downloading http://www.php.net/get/php-5.5.6.tar.bz2/from/this/mirror 
Already downloaded: /Library/Caches/Homebrew/php55-5.5.6 
==> Patching 
patching file configure 
Hunk #1 succeeded at 39041 (offset 764 lines). 
Warning: Backing up all known pear.conf and .pearrc files 
Warning: If you have a pre-existing pear install outside 
     of homebrew-php, or you are using a non-standard 
     pear.conf location, installation may fail. 
==> ./configure --prefix=/usr/local/Cellar/php55/5.5.6 --localstatedir=/usr/local/var --sysconfdir=/u 
==> make 
==> make install 
==> /usr/local/Cellar/php55/5.5.6/bin/pear config-set php_ini /usr/local/etc/php/5.5/php.ini 
==> Caveats 
To enable PHP in Apache add the following to httpd.conf and restart Apache: 
    LoadModule php5_module /usr/local/opt/php55/libexec/apache2/libphp5.so 

The php.ini file can be found in: 
    /usr/local/etc/php/5.5/php.ini 

✩✩✩✩ PEAR ✩✩✩✩ 

If PEAR complains about permissions, 'fix' the default PEAR permissions and config: 
    chmod -R ug+w /usr/local/Cellar/php55/5.5.6/lib/php 
    pear config-set php_ini /usr/local/etc/php/5.5/php.ini 

✩✩✩✩ Extensions ✩✩✩✩ 

If you are having issues with custom extension compiling, ensure that 
you are using the brew version, by placing /usr/local/bin before /usr/sbin in your PATH: 

     PATH="/usr/local/bin:$PATH" 

PHP55 Extensions will always be compiled against this PHP. Please install them 
using --without-homebrew-php to enable compiling against system PHP. 

✩✩✩✩ PHP CLI ✩✩✩✩ 

If you wish to swap the PHP you use on the command line, you should add the following to ~/.bashrc, 
~/.zshrc, ~/.profile or your shell's equivalent configuration file: 

     export PATH="$(brew --prefix josegonzalez/php/php55)/bin:$PATH" 
==> Summary 
    /usr/local/Cellar/php55/5.5.6: 491 files, 29M, built in 6.4 minutes 
==> Installing phpmyadmin dependency: mcrypt 
==> Downloading http://downloads.sourceforge.net/project/mcrypt/Libmcrypt/2.5.8/libmcrypt-2.5.8.tar.g 
######################################################################## 100,0% 
==> ./configure --prefix=/usr/local/Cellar/mcrypt/2.5.8 --mandir=/usr/local/Cellar/mcrypt/2.5.8/share 
==> make install 
    /usr/local/Cellar/mcrypt/2.5.8: 12 files, 348K, built in 34 seconds 
==> Installing phpmyadmin dependency: php55-mcrypt 
==> Downloading http://www.php.net/get/php-5.5.6.tar.bz2/from/this/mirror 
######################################################################## 100,0% 
==> PHP_AUTOCONF="/usr/local/opt/autoconf/bin/autoconf" PHP_AUTOHEADER="/usr/local/opt/autoconf/bin/a 
==> ./configure --prefix=/usr/local/Cellar/php55-mcrypt/5.5.6 --with-php-config=/usr/local/Cellar/php 
==> make 
==> Caveats 
To finish installing mcrypt for PHP 5.5: 
    * /usr/local/etc/php/5.5/conf.d/ext-mcrypt.ini was created, 
    do not forget to remove it upon extension removal. 
    * Restart your webserver. 
    * Write a PHP page that calls "phpinfo();" 
    * Load it in a browser and look for the info on the mcrypt module. 
    * If you see it, you have been successful! 
==> Summary 
    /usr/local/Cellar/php55-mcrypt/5.5.6: 3 files, 56K, built in 99 seconds 
==> Installing phpmyadmin 
==> Downloading http://downloads.sourceforge.net/project/phpmyadmin/phpMyAdmin/4.0.9/phpMyAdmin-4.0.9 
######################################################################## 100,0% 
==> Caveats 
Note that this formula will NOT install mysql. It is not 
required since you might want to get connected to a remote 
database server. 

Webserver configuration example (add this at the end of 
your /etc/apache2/httpd.conf for instance) : 
    Alias /phpmyadmin /usr/local/share/phpmyadmin 
    <Directory /usr/local/share/phpmyadmin/> 
    Options Indexes FollowSymLinks MultiViews 
    AllowOverride All 
    Order allow,deny 
    Allow from all 
    </Directory> 
Then, open http://localhost/phpmyadmin 

More documentation : file:///usr/local/Cellar/phpmyadmin/4.0.9/share/phpmyadmin/doc/ 

Don't forget to copy config.sample.inc.php to config.inc.php and : 
    - change your secret blowfish 
    - uncomment the configuration lines (pma, pmapass ...) 

==> Summary 
    /usr/local/Cellar/phpmyadmin/4.0.9: 1173 files, 28M, built in 40 seconds 

Answer 1

Вам нужно добавить следующую конфигурацию httpd.conf, как указано в выходе brew install.

Пример пути: /etc/apache2/httpd.conf

Alias /phpmyadmin /usr/local/share/phpmyadmin 
    <Directory /usr/local/share/phpmyadmin/> 
    Options Indexes FollowSymLinks MultiViews 
    AllowOverride All 
    Order allow,deny 
    Allow from all 
    </Directory> 

Затем перезапустить Apache.

Кроме того, конфигурация:

Don't forget to copy config.sample.inc.php to config.inc.php and : 
    - change your secret blowfish 
    - uncomment the configuration lines (pma, pmapass ...) 

Answer 2

Если вы используете локальный, MySQL обычно может быть достигнуто с помощью http://localhost/phpmyadmin

Answer 3

Возможно, вам не PHPMyAdmin установлен на всех. Вы должны попробовать следующее:

brew tap xy/homebrew-php 
brew install phpmyadmin