4
Я начинаю открывать Java-карту, скопировал код из образца. так или иначе, я смог как часть кода работает. Но все еще путают следующее.Работа с картой Java Card
. Способ работы владельца и как и когда установлен контакт . Как сделать кредитные и дебетовые работы
Я понимаю, как работает баланс, и этот аспект является prety ok. Ниже приведен код
wallet.java
/*
* To change this template, choose Tools | Templates
* and open the template in the editor.
*/
package classicapplet1;
import javacard.framework.APDU;
import javacard.framework.Applet;
import javacard.framework.ISO7816;
import javacard.framework.ISOException;
import javacard.framework.OwnerPIN;
public class Wallet extends Applet {
/* constants declaration */
// code of CLA byte in the command APDU header
final static byte Wallet_CLA = (byte) 0x80;
// codes of INS byte in the command APDU header
final static byte VERIFY = (byte) 0x20;
final static byte CREDIT = (byte) 0x30;
final static byte DEBIT = (byte) 0x40;
final static byte GET_BALANCE = (byte) 0x50;
// maximum balance
final static short MAX_BALANCE = 0x7FFF;
// maximum transaction amount
final static byte MAX_TRANSACTION_AMOUNT = 127;
// maximum number of incorrect tries before the
// PIN is blocked
final static byte PIN_TRY_LIMIT = (byte) 0x03;
// maximum size PIN
final static byte MAX_PIN_SIZE = (byte) 0x08;
// signal that the PIN verification failed
final static short SW_VERIFICATION_FAILED = 0x6300;
// signal the the PIN validation is required
// for a credit or a debit transaction
final static short SW_PIN_VERIFICATION_REQUIRED = 0x6301;
// signal invalid transaction amount
// amount > MAX_TRANSACTION_AMOUNT or amount < 0
final static short SW_INVALID_TRANSACTION_AMOUNT = 0x6A83;
// signal that the balance exceed the maximum
final static short SW_EXCEED_MAXIMUM_BALANCE = 0x6A84;
// signal the the balance becomes negative
final static short SW_NEGATIVE_BALANCE = 0x6A85;
/* instance variables declaration */
OwnerPIN pin;
short balance;
private Wallet(byte[] bArray, short bOffset, byte bLength) {
// It is good programming practice to allocate
// all the memory that an applet needs during
// its lifetime inside the constructor
pin = new OwnerPIN(PIN_TRY_LIMIT, MAX_PIN_SIZE);
byte iLen = bArray[bOffset]; // aid length
bOffset = (short) (bOffset + iLen + 1);
byte cLen = bArray[bOffset]; // info length
bOffset = (short) (bOffset + cLen + 1);
byte aLen = bArray[bOffset]; // applet data length
// The installation parameters contain the PIN
// initialization value
pin.update(bArray, (short) (bOffset + 1), aLen);
register();
} // end of the constructor
public static void install(byte[] bArray, short bOffset, byte bLength) {
// create a Wallet applet instance
new Wallet(bArray, bOffset, bLength);
} // end of install method
public boolean select() {
// The applet declines to be selected
// if the pin is blocked.
if (pin.getTriesRemaining() == 0) {
return false;
}
return true;
}// end of select method
public void deselect() {
// reset the pin value
pin.reset();
}
public void process(APDU apdu) {
// APDU object carries a byte array (buffer) to
// transfer incoming and outgoing APDU header
// and data bytes between card and CAD
// At this point, only the first header bytes
// [CLA, INS, P1, P2, P3] are available in
// the APDU buffer.
// The interface javacard.framework.ISO7816
// declares constants to denote the offset of
// these bytes in the APDU buffer
byte[] buffer = apdu.getBuffer();
// check SELECT APDU command
if (apdu.isISOInterindustryCLA()) {
if (buffer[ISO7816.OFFSET_INS] == (byte) (0xA4)) {
return;
}
ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
}
// verify the reset of commands have the
// correct CLA byte, which specifies the
// command structure
if (buffer[ISO7816.OFFSET_CLA] != Wallet_CLA) {
ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
}
switch (buffer[ISO7816.OFFSET_INS]) {
case GET_BALANCE:
getBalance(apdu);
return;
case DEBIT:
debit(apdu);
return;
case CREDIT:
credit(apdu);
return;
case VERIFY:
verify(apdu);
return;
default:
ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED);
}
} // end of process method
private void credit(APDU apdu) {
// access authentication
if (!pin.isValidated()) {
ISOException.throwIt(SW_PIN_VERIFICATION_REQUIRED);
}
byte[] buffer = apdu.getBuffer();
// Lc byte denotes the number of bytes in the
// data field of the command APDU
byte numBytes = buffer[ISO7816.OFFSET_LC];
// indicate that this APDU has incoming data
// and receive data starting from the offset
// ISO7816.OFFSET_CDATA following the 5 header
// bytes.
byte byteRead = (byte) (apdu.setIncomingAndReceive());
// it is an error if the number of data bytes
// read does not match the number in Lc byte
if ((numBytes != 1) || (byteRead != 1)) {
ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
}
// get the credit amount
byte creditAmount = buffer[ISO7816.OFFSET_CDATA];
// check the credit amount
if ((creditAmount > MAX_TRANSACTION_AMOUNT) || (creditAmount < 0)) {
ISOException.throwIt(SW_INVALID_TRANSACTION_AMOUNT);
}
// check the new balance
if ((short) (balance + creditAmount) > MAX_BALANCE) {
ISOException.throwIt(SW_EXCEED_MAXIMUM_BALANCE);
}
// credit the amount
balance = (short) (balance + creditAmount);
} // end of deposit method
private void debit(APDU apdu) {
// access authentication
if (!pin.isValidated()) {
ISOException.throwIt(SW_PIN_VERIFICATION_REQUIRED);
}
byte[] buffer = apdu.getBuffer();
byte numBytes = (buffer[ISO7816.OFFSET_LC]);
byte byteRead = (byte) (apdu.setIncomingAndReceive());
if ((numBytes != 1) || (byteRead != 1)) {
ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
}
// get debit amount
byte debitAmount = buffer[ISO7816.OFFSET_CDATA];
// check debit amount
if ((debitAmount > MAX_TRANSACTION_AMOUNT) || (debitAmount < 0)) {
ISOException.throwIt(SW_INVALID_TRANSACTION_AMOUNT);
}
// check the new balance
if ((short) (balance - debitAmount) < (short) 0) {
ISOException.throwIt(SW_NEGATIVE_BALANCE);
}
balance = (short) (balance - debitAmount);
} // end of debit method
private void getBalance(APDU apdu) {
byte[] buffer = apdu.getBuffer();
// inform system that the applet has finished
// processing the command and the system should
// now prepare to construct a response APDU
// which contains data field
short le = apdu.setOutgoing();
if (le < 2) {
ISOException.throwIt((byte) 0x6A86);
}
// informs the CAD the actual number of bytes
// returned
apdu.setOutgoingLength((byte) 2);
// move the balance data into the APDU buffer
// starting at the offset 0
buffer[0] = (byte) (balance >> 8);
buffer[1] = (byte) (balance & 0xFF);
// send the 2-byte balance at the offset
// 0 in the apdu buffer
apdu.sendBytes((short) 0, (short) 2);
} // end of getBalance method
private void verify(APDU apdu) {
byte[] buffer = apdu.getBuffer();
// retrieve the PIN data for validation.
byte byteRead = (byte) (apdu.setIncomingAndReceive());
// check pin
// the PIN data is read into the APDU buffer
// at the offset ISO7816.OFFSET_CDATA
// the PIN data length = byteRead
if (pin.check(buffer, ISO7816.OFFSET_CDATA, byteRead) == false) {
ISOException.throwIt(SW_VERIFICATION_FAILED);
}
} // end of validate method
} // end of class Wallet
и ниже ОПЗ файл wallet.scr
//Test script for Applet 'Wallet'
powerup;
// Select Wallet //aid/27ADED2B70/39
0x00 0xA4 0x04 0x00 0X06 0X27 0XAD 0XED 0X2B 0X70 0X3A 0x7F;
//Send the APDU here
//0x80 0xCA 0x00 0x00 <length> <data> 0x7F;
0x80 0x50 0x00 0x00 0x00 0x7F;
powerdown;
выше wallet.scr, я использовал, чтобы проверить баланс и отъезда положить:
CLA: 80, INS: 50, P1: 00, P2: 00, Lc: 00, Le: 02, 00, 00, SW1: 90, SW2: 00
который ожидается. Но когда я пытаюсь кредитовать и дебетовать, как я должен это делать? Заранее спасибо
очень хороший ответ. Спасибо слот. Пожалуйста, где я получу материал. Для предварительного учебника @shortman –
Я бы предложил дать этой книге «Технология Java Card для смарт-карт Zhiqun Chen». Я все еще использую ее в качестве справочника, когда у меня возникают проблемы. – ShortMan