1. дома
  2. Вопрос и ответ
  3. gunicorn: start: Не удалось запустить

gunicorn: start: Не удалось запустить

2016-05-01 3 views
0

У меня проблема с запуском моего пулеметчика - приложение Flask на моем сервере.gunicorn: start: Не удалось запустить

Мой сервер Ubuntu 14.04 64 бит.

Когда я начинаю gunicorn от терминала (и иметь виртуальную среду активного):

gunicorn --bind 0.0.0.0:8000 wsgi

это работает, я могу соединиться с портом 8000.

, но когда я хочу начать sudo service MyApp, это дает мне следующее сообщение об ошибке:

start: Job failed to start

мой /etc/init/MyApp.conf является:

description "Gunicorn application server running MyApp" 

start on runlevel [2345] 
stop on runlevel [!2345] 

respawn 
setuid juldou 
setgid www-data 

env PATH=/home/juldou/MyApp/project_juda/bin 
chdir /home/juldou/MyApp 
exec gunicorn --workers 3 --bind unix:MyApp.sock -m 007 wsgi

ПРИМЕЧАНИЕ:

I know that I don't have created MyApp.sock, I don't know if I must have or this script create MyApp.sock

Где должна быть проблема?

UPDATE: от терминала, эта команда работает:

(project_juda) [email protected]:~/MyApp$ gunicorn --workers 3 --bind unix:MyApp.sock -m 007 wsgi 
[2016-05-01 14:06:41 +0000] [8119] [INFO] Starting gunicorn 19.4.5 
[2016-05-01 14:06:41 +0000] [8119] [INFO] Listening at: unix:MyApp.sock (8119) 
[2016-05-01 14:06:41 +0000] [8119] [INFO] Using worker: sync 
[2016-05-01 14:06:41 +0000] [8124] [INFO] Booting worker with pid: 8124 
[2016-05-01 14:06:41 +0000] [8127] [INFO] Booting worker with pid: 8127 
[2016-05-01 14:06:41 +0000] [8130] [INFO] Booting worker with pid: 8130 
[2016-05-01 14:07:28 +0000] [8119] [INFO] Handling signal: int 
[2016-05-01 14:07:28 +0000] [8124] [INFO] Worker exiting (pid: 8124) 
[2016-05-01 14:07:28 +0000] [8130] [INFO] Worker exiting (pid: 8130) 
[2016-05-01 14:07:28 +0000] [8127] [INFO] Worker exiting (pid: 8127) 
[2016-05-01 14:07:28 +0000] [8119] [INFO] Shutting down: Master

auth.log:

May 2 11:16:20 ubuntu-512mb-fra1-01-improveyourself sshd[13991]: 

pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=212.45.1.10 user=www-data 
May 2 11:16:22 ubuntu-512mb-fra1-01-improveyourself sshd[13991]: Failed password for www-data from 212.45.1.10 port 39557 ssh2 
May 2 11:16:22 ubuntu-512mb-fra1-01-improveyourself sshd[13991]: Received disconnect from 212.45.1.10: 11: Bye Bye [preauth] 
May 2 11:16:44 ubuntu-512mb-fra1-01-improveyourself sshd[13997]: reverse mapping checking getaddrinfo for 50-250-218-65-static.hfc.comcastbusiness.net [50.250.218.65] failed - POSSIBLE BREAK-IN ATTEMPT! 
May 2 11:16:44 ubuntu-512mb-fra1-01-improveyourself sshd[13997]: Invalid user squid from 50.250.218.65 
May 2 11:16:44 ubuntu-512mb-fra1-01-improveyourself sshd[13997]: input_userauth_request: invalid user squid [preauth] 
May 2 11:16:44 ubuntu-512mb-fra1-01-improveyourself sshd[13997]: pam_unix(sshd:auth): check pass; user unknown 
May 2 11:16:44 ubuntu-512mb-fra1-01-improveyourself sshd[13997]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=50.250.218.65 
May 2 11:16:46 ubuntu-512mb-fra1-01-improveyourself sshd[13997]: Failed password for invalid user squid from 50.250.218.65 port 48021 ssh2 
May 2 11:16:46 ubuntu-512mb-fra1-01-improveyourself sshd[13997]: Received disconnect from 50.250.218.65: 11: Bye Bye [preauth] 
May 2 11:16:49 ubuntu-512mb-fra1-01-improveyourself sshd[13999]: reverse mapping checking getaddrinfo for 67-219-227-156.mycomspan.com [67.219.227.156] failed - POSSIBLE BREAK-IN ATTEMPT! 
May 2 11:16:49 ubuntu-512mb-fra1-01-improveyourself sshd[13999]: Invalid user wordpress from 67.219.227.156 
May 2 11:16:49 ubuntu-512mb-fra1-01-improveyourself sshd[13999]: input_userauth_request: invalid user wordpress [preauth] 
May 2 11:16:49 ubuntu-512mb-fra1-01-improveyourself sshd[13999]: pam_unix(sshd:auth): check pass; user unknown 
May 2 11:16:49 ubuntu-512mb-fra1-01-improveyourself sshd[13999]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=67.219.227.156 
May 2 11:16:52 ubuntu-512mb-fra1-01-improveyourself sshd[13999]: Failed password for invalid user wordpress from 67.219.227.156 port 37151 ssh2 
May 2 11:16:52 ubuntu-512mb-fra1-01-improveyourself sshd[13999]: Received disconnect from 67.219.227.156: 11: Bye Bye [preauth]

syslog:

May 2 07:17:01 ubuntu-512mb-fra1-01-improveyourself CRON[12670]: (root) CMD ( cd/&& run-parts --report /etc/cron.hourly) 
May 2 08:17:01 ubuntu-512mb-fra1-01-improveyourself CRON[12920]: (root) CMD ( cd/&& run-parts --report /etc/cron.hourly) 
May 2 09:17:01 ubuntu-512mb-fra1-01-improveyourself CRON[13174]: (root) CMD ( cd/&& run-parts --report /etc/cron.hourly) 
May 2 10:17:01 ubuntu-512mb-fra1-01-improveyourself CRON[13473]: (root) CMD ( cd/&& run-parts --report /etc/cron.hourly) 
May 2 11:05:55 ubuntu-512mb-fra1-01-improveyourself kernel: [167847.860083] init: Failed to spawn MyApp main process: unable to execute: No such file or directory 
May 2 11:07:02 ubuntu-512mb-fra1-01-improveyourself kernel: [167915.147641] init: Failed to spawn MyApp main process: unable to execute: No such file or directory 
May 2 11:07:12 ubuntu-512mb-fra1-01-improveyourself kernel: [167925.023643] init: Failed to spawn MyApp main process: unable to execute: No such file or directory 
May 2 11:07:50 ubuntu-512mb-fra1-01-improveyourself kernel: [167963.214775] init: Failed to spawn MyApp main process: unable to execute: No such file or directory 
May 2 11:15:49 ubuntu-512mb-fra1-01-improveyourself kernel: [168442.437658] init: Failed to spawn MyApp main process: unable to execute: No such file or directory 
May 2 11:16:29 ubuntu-512mb-fra1-01-improveyourself kernel: [168481.799393] init: Failed to spawn MyApp main process: unable to execute: No such file or directory 
May 2 11:17:01 ubuntu-512mb-fra1-01-improveyourself CRON[14004]: (root) CMD ( cd/&& run-parts --report /etc/cron.hourly)

UPDATE:

(project_juda) [email protected]:~/MyApp/project_juda/bin$ ls 
MyApp.sock activate  activate.fish  easy_install  markdown_py pip3 pwiz.py  python   python3 wheel 
__pycache__ activate.csh activate_this.py easy_install-3.4 pip   pip3.4 pygmentize python-config python3.4 
(project_juda) [email protected]:~/MyApp/project_juda/bin$ deactivate 
[email protected]:~/MyApp/project_juda/bin$ gun 
gunicorn   gunicorn_django gunicorn_paster gunzip   
[email protected]:~/MyApp/project_juda/bin$ gunicorn --workers 3 --bind unix:MyApp.sock -m 007 wsgi 
[2016-05-02 11:44:31 +0000] [14195] [INFO] Starting gunicorn 19.4.5 
[2016-05-02 11:44:31 +0000] [14195] [INFO] Listening at: unix:MyApp.sock (14195) 
[2016-05-02 11:44:31 +0000] [14195] [INFO] Using worker: sync 
[2016-05-02 11:44:31 +0000] [14200] [INFO] Booting worker with pid: 14200 
[2016-05-02 11:44:31 +0000] [14200] [ERROR] Exception in worker process: 
Traceback (most recent call last): 
    File "/usr/local/lib/python2.7/dist-packages/gunicorn/arbiter.py", line 515, in spawn_worker 
    worker.init_process() 
    File "/usr/local/lib/python2.7/dist-packages/gunicorn/workers/base.py", line 122, in init_process 
    self.load_wsgi() 
    File "/usr/local/lib/python2.7/dist-packages/gunicorn/workers/base.py", line 130, in load_wsgi 
    self.wsgi = self.app.wsgi() 
    File "/usr/local/lib/python2.7/dist-packages/gunicorn/app/base.py", line 67, in wsgi 
    self.callable = self.load() 
    File "/usr/local/lib/python2.7/dist-packages/gunicorn/app/wsgiapp.py", line 65, in load 
    return self.load_wsgiapp() 
    File "/usr/local/lib/python2.7/dist-packages/gunicorn/app/wsgiapp.py", line 52, in load_wsgiapp 
    return util.import_app(self.app_uri) 
    File "/usr/local/lib/python2.7/dist-packages/gunicorn/util.py", line 357, in import_app 
    __import__(module) 
ImportError: No module named wsgi 
Traceback (most recent call last): 
    File "/usr/local/lib/python2.7/dist-packages/gunicorn/arbiter.py", line 515, in spawn_worker 
    worker.init_process() 
    File "/usr/local/lib/python2.7/dist-packages/gunicorn/workers/base.py", line 122, in init_process 
    self.load_wsgi() 
    File "/usr/local/lib/python2.7/dist-packages/gunicorn/workers/base.py", line 130, in load_wsgi 
    self.wsgi = self.app.wsgi() 
    File "/usr/local/lib/python2.7/dist-packages/gunicorn/app/base.py", line 67, in wsgi 
    self.callable = self.load() 
    File "/usr/local/lib/python2.7/dist-packages/gunicorn/app/wsgiapp.py", line 65, in load 
    return self.load_wsgiapp() 
    File "/usr/local/lib/python2.7/dist-packages/gunicorn/app/wsgiapp.py", line 52, in load_wsgiapp 
    return util.import_app(self.app_uri) 
    File "/usr/local/lib/python2.7/dist-packages/gunicorn/util.py", line 357, in import_app 
    __import__(module) 
ImportError: No module named wsgi 
[2016-05-02 11:44:31 +0000] [14200] [INFO] Worker exiting (pid: 14200) 
[2016-05-02 11:44:31 +0000] [14195] [INFO] Shutting down: Master 
[2016-05-02 11:44:31 +0000] [14195] [INFO] Reason: Worker failed to boot.

источник

2016-05-01 Július Marko

+0

Почему у вас есть переменная PATH? – RaviTezu

+0

@RaviTezu Я только что последовал за учебником, это PATH для моего virtualenv. Я новичок. –

+0

Команда, которую вы запускали из командной строки, отличается от того, что делает ваша служба. Попробуйте запустить ту же команду из командной строки: 'gunicorn -workers 3 --bind unix: MyApp.sock -m 007 wsgi'. Я уверен, что он покажет вам полезную информацию. Кроме того, проверьте свои журналы выскочки ('/ var/log/upstart/MyApp.conf') – iurisilvio

ответ

0

Я думаю, что линия

chdir /home/juldou/MyApp

не меняется каталог, в котором находится wsgi.

Попробуйте изменить /home/juldou/MyApp на путь, где вы можете запустить его из терминала.

источник

2016-05-02 16:09:06 totoro

Смежные вопросы

 Смежные вопросы