надеюсь, что один из вас там может мне помочь!Adafruit SHT31-D и Raspberry Pi2 - невозможно прочитать данные от датчика
Я пытаюсь использовать плату Adafruit SHT31-D (i2c) с моим Pi2. Я ухожу от this datasheet, чтобы направлять мои усилия по кодированию. Я использую Wiring Pi (wiringpi.com) для облегчения вещей.
Я могу успешно открыть подключение к устройству, и команды отправки, похоже, работают нормально, но я не могу прочитать данные обратно! Вот небольшая мини-библиотека, которую я собрал. Я надеюсь, что у кого-то из вас может быть некоторый опыт в этом, и я смогу помочь мне увидеть, где я ошибся.
Чтобы исключить любые возможные проблемы с сенсорным оборудованием, я проверил его с помощью Arduino UNO, и он работает без проблем.
Вот мой C++ код:
SHT3x.h
#pragma once
/* Sensor Commands */
#define DEFAULT_SHT_ADDR 0x44
#define MEAS_HREP_STRETCH 0x2C06
#define MEAS_MREP_STRETCH 0x2C0D
#define MEAS_LREP_STRETCH 0x2C10
#define MEAS_HREP 0x2400
#define MEAS_MREP 0x240B
#define MEAS_LREP 0x2416
#include <cstdint>
class SHT3x {
public:
SHT3x(const uint8_t& i2cAddr);
float readHumidity(const uint16_t& command) const;
float readTempC(const uint16_t& command) const;
float readTempF(const uint16_t& command) const;
private:
int8_t _fd;
uint8_t _header;
uint32_t getMeasurement(const uint16_t& command) const;
void sendCommand(const uint16_t& command) const;
uint32_t receiveData(void) const;
};
SHT3x.cpp
#include <stdexcept>
#include <wiringPi.h>
#include <wiringPiI2C.h>
#include "SHT3x.h"
SHT3x::SHT3x(const uint8_t& i2cAddr) {
_fd = wiringPiI2CSetup(i2cAddr);
_header = i2cAddr << 1;
if (_fd < 0) {
throw std::runtime_error("Unable to connect");
}
}
float SHT3x::readHumidity(const uint16_t& command) const {
uint32_t raw_data = getMeasurement(command);
if (!raw_data) {
throw std::runtime_error("Bad Reading.");
}
uint16_t raw_humidity = raw_data & 0xFFFF;
float humidity = 100.0 * ((float) raw_humidity/(float) 0xFFFF);
return humidity;
}
float SHT3x::readTempC(const uint16_t& command) const {
uint32_t raw_data = getMeasurement(command);
if (!raw_data) {
throw std::runtime_error("Bad Reading.");
}
uint16_t raw_temp = raw_data >> 16;
float tempC = -45.0 + (175.0 * ((float) raw_temp/(float) 0xFFFF));
return tempC;
}
float SHT3x::readTempF(const uint16_t& command) const {
uint32_t raw_data = getMeasurement(command);
if (!raw_data) {
throw std::runtime_error("Bad Reading.");
}
uint16_t raw_temp = raw_data >> 16;
float tempF = -49.0 + (315.0 * ((float) raw_temp/(float) 0xFFFF));
return tempF;
}
uint32_t SHT3x::getMeasurement(const uint16_t& command) const {
try {
sendCommand(command);
} catch (std::runtime_error& e) {
throw;
}
return receiveData();
}
void SHT3x::sendCommand(const uint16_t& command) const {
// break command into bytes
uint8_t MSB = command >> 8;
uint8_t LSB = command & 0xFF;
// send header
int8_t ack = wiringPiI2CWrite(_fd, _header);
// send command
ack &= wiringPiI2CWrite(_fd, MSB);
ack &= wiringPiI2CWrite(_fd, LSB);
// handle errors
if (ack) {
throw std::runtime_error("Sending command failed.");
}
}
uint32_t SHT3x::receiveData(void) const {
uint32_t data;
// send header
uint8_t read_header = _header | 0x01;
int8_t ack = wiringPiI2CWrite(_fd, read_header);
// handle errors
if (ack) throw std::runtime_error("Unable to read data.");
// read data
data = wiringPiI2CRead(_fd);
for (size_t i = 0; i < 4; i++) {
printf("Data: %d\n", data);
data <<= 8;
if (i != 1) {
data |= wiringPiI2CRead(_fd);
} else {
wiringPiI2CRead(_fd); // skip checksum
}
}
wiringPiI2CRead(_fd); // second checksum
return data;
}
Что вы делаете, чтобы указать, что это не удалось прочитать? например он бросает ошибку времени выполнения «Невозможно прочитать данные» или бросает «Плохое чтение» или что-то еще? –
@MattJordan: Он бросает «Плохое чтение». Я всегда получаю нулевое значение –